Optimization and improvement of the conveyor belt
Block conveyor belt
In order to improve the carrying capacity of the block, the lateral bending deformation is the least, which is the key to reduce the lateral load carrying capacity of the belt. The lateral rigidity of the belt body is the ratio between the two sides of the body and the weight of the belt and the width of the belt in the case of the belt body. The lateral rigidity of the high lateral rigidity is not more than 0.05. The lateral stiffness of the structure is improved, and the lateral rigidity of the bearing is 0.036, and the bearing capacity is 15% ~ 20%. Improve the heavy-duty gear edge conveyor with lateral stiffness of effective measures is in the flat band multilayer tensile canvas interlayer arranged the special mixing smelting and rolling of polyester staple fiber special composite adhesive, polyester staple fiber in inner layer along the transverse single directional placement of the buried layer. This has the sidewall conveyer use with transverse flexural capacity enhancement special composite layer with can make the lateral stiffness of the belt body value compared with the general structure of the sidewall conveyor belt increased 2.5 times, even the lateral rigidity values increased from 0.09 to 0.036.
Shanghai Wan Xu industrial belt Co., Ltd. - block side conveyor belt
Common to the side of the conveyor belt for large angle wave transmission belt, the side of the conveyor belt is first developed by the British company, and began to promote. Our country is promoted by Japan.