Maintenance of pattern conveyor belt
1. Conveyor belt in the transportation and storage should be kept clean, avoid direct sunlight and rain leaching, prevent and acid, alkali, oil, organic solvent influence quality of rubber material contact, and distance heating device 1 meters away.
2 storage, the storage temperature should be maintained at a temperature of - 15 - +40, the relative humidity should be maintained between 50 - 80%.
3 storage conveyor belt shall be placed into rolls, not folded, placed during turning once every quarter.
4 conveyor belt running speed should not be more than 5 m / s, the transport block is large, the wear of the material and the use of fixed plow type unloading device should be used as far as possible. When the speed exceeds the specified speed, it will affect the service life of the adhesive tape.
5 transport roller diameter and belt conveyor belt, transmission roller to the supporting roller and roller groove angle of the requirements, should be based on the design of the transmission machine, reasonable selection.
6 in order to reduce the impact of the material on the belt and wear, to the direction of the material direction should be along the direction of the adhesive tape, the drop to the adhesive tape should be reduced to the belt, the belt should be avoided or the top of the roller. In order to prevent the scratch tape, block material scraper cleaning device and unloading material device and tape contact portion should be the proper hardness of rubber sheet, do not use clip cloth layer of the adhesive tape head.