News:
News
Location:Home-News
Skirt belt price
Source:www.shwanxu.com Author:上海万旭 Update time:2015年12月10日
Skirt belt
The skirt belt is covered by the baseband glue, cover, belt core and transverse rigid layer is composed of four parts. The thickness of the upper cover is generally 3-6mm, and the thickness of the lower cover is 1.5-4.5mm. With core material to bear the pulling force, the material may be cotton canvas (CC), nylon canvas (NN), polyester canvas (EP) or steel wire rope (ST). In order to increase the lateral rigidity of the base band, the core body is added to the special reinforcing layer, which is called the horizontal rigid layer. The width of the base band is the same as the ordinary adhesive tape, which is in accordance with the standard of GB/T7984-2001.
The skirt lifting and conveying belt (corrugated sidewall conveyor belt) consists of three parts:
1 high strength and high wear resistance, with greater lateral rigidity and longitudinal flexibility.
2 high strength heat vulcanized rubber corrugated baffle.
3 the owner of the object down the horizontal baffle. (the point of the edge of the block and the partition of the several generation of heat flow into one, the height of the baffle and the baffle can be reached 40-630mm, in which the variants are added to the canvas to enhance the anti tear strength of the block.
Maintenance and description:
1, conveyor belt in transportation and storage, should be kept clean to avoid the sun or rain, snow leaching, prevent and acid, alkali oil, organic solvents and other substances in contact, and distance heating device a meter away.
2, during storage, products must be placed into a roll, not folded, placed during turning once every quarter.
3, different types, specifications of the conveyor belt should not be used together, the best use of adhesive bonding method.
4, the type, structure, size, number of layers should be selected according to the conditions of use.
5, the drive roller conveyor belt and the diameter of the cloth layer, Guan Di read drum, drum to the supporting roller and groove angle requirements should be based on the design requirements of transport, reasonable selection.
Reprint please indicate://?thread-2922-1.html


Prev:​Conveyor belt manufacturers - conveyor belt price
Next:​Pattern conveyor belt manufacturers

Copyright © 2009- 2016 www.shwanxu.com All rights reserved 沪ICP备16036038号
Shanghai wanxu industrial belt co.,LTD TEL : 86-21-64065727 FAX : 86-21-62215879