Conveyor belt manufacturers
2010, the rubber conveyor belt industry will be fully implemented product replacement, and to adjust and improve the existing production process, improve the process of mechanization, automation, continuity and rationality, as well as the stability of product quality.
1, the large angle of the conveyor belt conveyor belt on the roller requirements is much higher than the flat belt, if in the same type of case to use the same type of roller model to large.
2, baseband
Corrugated sidewall belt conveyor baseband is mainly subjected to tension, but in use in the process of the lateral stiffness on the use of performance and effect also plays a significant role. Such as conveyor belt rigidity is too small, it will cause the conveyor belt lateral deformation, causing the material and other phenomena. (such as selection of CC-56 cotton canvas core layer conveyor belt, the tensile strength 56N/mm and core layers at least 6 layer above, containing 6 layer, upper cover above photoresist thickness =4.5mm, under cover above photoresist thickness = 1.5mm).
3, large dip angle of the conveyor belt storage and use of the same method as the ordinary conveyor belt and heat resistant conveyor belt.
4, large dip angle of the transmission with more than 70 degree angle should be used to cover the belt, (using the benefits of cover to prevent leakage of the base band caused damage; but also to increase the volume of material).