Conveyor belt manufacturers
1. The structure, specification and number of the required conveyor belts for the user should be reasonably applied to the use of the conditions of use (the material and transport environment etc.).
Conveyor belt skeleton layer 5-8 9-12 3-4
Safety factor 101112
The strength of the conveyor belt shall be in accordance with the following provisions:
2, different types, specifications, the number of layers of the conveyor belt can not be connected, conveyor belt joints are best used glue.
3, the conveyor belt running speed is generally not greater than 2.5m/s, block degree large, wear large material and use of fixed plow type unloading device should be used at low speed.
4, the belt conveyor belt conveyor belt conveyor belt, the relationship between the transmission roller, the roller and the supporting roller, which should be in accordance with the requirements of TD62 type conveyor design requirements.
5, feeding direction should be and conveying belt running direction, to reduce the falling material for transporting the impact of the slide groove reduce material falling distance; conveyor belt material receiving section should be shortened supporting and spacing of the buffer roller, to prevent the leakage of material, with a side of moderately soft gear sheet should be used, lest file material excellent, scraping conveying belt surface.