Conveyor belt joint method:
As the conveyor belt must be connected to the ring to be used, so the conveyor belt joints directly affect the service life of the conveyor belt and the smooth operation of the transmission line. General conveyor belt joints commonly used method of mechanical joints, cold bonding joints, hot vulcanized joints, etc.. So different joints also correspond to different prices.
In the process of conveying belt in the use of various reasons, then the following is a number of common processing methods:
Transfer tape in the transportation and storage should be kept clean to avoid direct sunlight or rain leaching, prevent and acid, alkali, oil, organic solvents and other substances to come in contact with, and distance heating device one meter away.
Second, storage warehouse temperature should be maintained between 18-40 degrees, relative humidity should be maintained at between 50 - 80%, storage during products must be placed volumes, not folded, during the placement should quarterly turning once.
Three, different types, specifications of the conveyor belt should not be used together, the best use of adhesive bonding method. The type, structure, specification and number of the conveyer belt should be selected according to the use condition.
Four, conveyor belt running speed is generally not more than 2.5 m / s, block degree, large wear and tear of the material and the use of fixed pear unloading device should be used as far as possible the use of low speed.
Five, the transmission roller diameter and belt conveyor belt, transmission roller, roller, and the supporting roller groove angle requirements should be based on the design of transport aircraft, reasonable selection.
Six, feeding direction should be along the running direction of the belt, to reduce the material falling when on belt impact should adopt the chute, reduce material falling distance; inlet tape should be relationship supporting and spacing and the buffer roller for material leakage, with adaptation by the moderately soft baffle plate, lest excellent baffle plate, scraping conveying belt surface.
Conveyor belt manufacturers offer