1, the fixed belt conveyor accessories should be installed on the strong foundation; mobile belt conveyor in the operation, should be the wheels of a symmetrical wedge. When parallel operations, each other should set aside more than 1m of the channel. There should be no accumulation of work around the conveyor.
2, before the start, should be adjusted good conveying belt tightness, belt buckle should be firmly, bearing, gear, chain transmission parts should be good, idler and protective device should be complete, electrical grounding protection zero or ground should be good, conveyor belt and drum width should be consistent.
3, start, no-load operation should be first, to be in normal operation, can be uniform loading. Not to start charging.
4, feeding, should be used to reduce the height of the quasi conveyor belt center and reduce the impact on the conveyor belt, roller. Feeding should be kept uniform.
5, the operation, should be at any time to observe the mechanical operation, when the transmission with the relaxation or deviation phenomenon, should stop to adjust.
6, the operation, no one from the conveyor belt below through, or from above. When the conveyor belt is slipping, it is forbidden to pull the belt. To clean or repair the operation when the operation is strictly prohibited.