Pho:86-21-64065727/54855598
Tel:13818736199
Fax:86-21-62215879
E_mail:shwanxu@163.com
Name:Zhao li (sales manager)
Analysis of causes of acid and alkali resistant conveyor belt
Conveyor belt running deviation is the most common fault belt conveyor, if handled not in time, let the conveyor belt running deviation, lead to intense friction conveyor belt and frame, conveyor belt edge is torn, hair and even not only affect the service life of conveyor belt, but also easy to sa, affect production. Conveyor belt running deviation serious when will fall from roller, causing downtime to a major accident, therefore, in the belt conveyor installation, commissioning, operation and maintenance work should be pay special attention to the running condition of the conveyor belt, to prevent the conveyor belt running deviation cause an accident.
Conveyor belt running deviation is refers to the conveyor in the process of operation, the center line of the conveyor belt does not agree with the center line of the conveyor, swaying phenomenon.
Conveyor belt running deviation reason of conveyor belt running deviation is the root cause of conveyor belt in the process of running, the lateral force caused by the imbalance. Main reasons are: 1. The installation quality, frame, cylinder didn't adjust the flat.
2 roll shaft line perpendicular to the center line of the conveyor belt is not.
3 racks and ground connection strength is insufficient, unstable rack.
4 guide chute and unloading groove guide baffle improper installation location, uneven.
5 conveyor belt quality reason, the conveyor belt joint with the center line is not straight.
Six conveyor belt edge ogee.
7 quality loading point is not in the middle of the conveyor belt.
8 maintain quality roller cleaning not clean, sticky coal, expected, the platen tilts, deformation, etc.
Prev:Heat resistant conveyor belt maintenance method
Next:The advantages of nylon roller